• Facebook
  • LinkedIn

Online Shop

Dynacord 2ch 100V Power Amplifier

The PCL-1240T amplifier is equipped with performance output transformers they also provide floating outputs for 50V, 70V and 100V installations.

Advanced Details

This power amplifier with outstanding reliability, 2RU design will be hard to match in any situation.

The Dynacord PCL-Series 1240T has several safeguard circuits inbuilt which prevent damaged to the amplifier as well as the speakers that you connect, such as Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection and Thermal Overload Protection this is something that all amplifier manufacturers should have however fall short of the mark.

On the back of the Dynacord PCL1240T it has a hi-pass filters with selectable cut-off frequency to attenuate undesirable low-frequency signals. Variable low-noise cooling fans guarantee thermal stability while keeping fan noise to a minimum this also allows for a smooth flow of air from front-to-rear. Dynacord High density toroidal transformers power supply units with low-leakage provide extensive headroom greater than the listed power rating.

Keeping things simple for all installations Dynacord use Phoenix style screw-lock connectors this prevent accidental disconnection on the 'audio signal' and 'speaker cables'. The PCL-1240T amplifier is equipped with performance output transformers they also provide floating outputs for 50V, 70V and 100V installations.

Dimensions: 483 x 88 x 405mm (2U)
Power Rating: 430 watt x 2 @ 4ohms/100volt line
Weight: 26kg
 

 

 

Your Name
Your Email
Phone
Subject
Message
An email has been sent to your email address.