Categories
Browse by:
Earthworks Two Channel Zero Distortion
Earthworks Two Channel Zero Distortion Technology Preamp (1 rack space). Frequency response from 1Hz to 200kHz +/-0.5dB, Zero Distortion less than one part per million, High output level +30dBu, Very Low Output Impedance will drive long lines without interference or signal loss, True 48 volt phantom, polarity reverse & clip indicator, Separate XLR & 1/4 Phone (TRS) outputs, each with its own gain/level controls, Lowest Noise of any preamp on the market. | |
Code: | 1022 |
Brand: | Earthworks Audio |
Earthworks Two Channel Zero Distortion Technology Preamp (1 rack space). Frequency response from 1Hz to 200kHz +/-0.5dB, Zero Distortion – less than one part per million, High output level +30dBu, Very Low Output Impedance will drive long lines without interference or signal loss, True 48 volt phantom, polarity reverse & clip indicator, Separate XLR & 1/4” Phone (TRS) outputs, each with its own gain/level controls, Lowest Noise of any preamp on the market.
Zero Distortion – less than one part per million
High output level +30dBu
Very low output impedance will drive long lines without interference or signal loss
True 48 volt phantom, polarity reverse & clip indicator
Separate XLR & 1/4” Phone (t-r-s) outputs, each with its own gain/level controls
1/4” phone connector output will drive balanced or unbalanced inputs
Full differential (balanced) from XLR in to XLR out – no internal conversion to single-ended
All discrete components; Class A amplification (no ICs in the signal path)
Greater transparency with minimum signal path and minimum features
Specifications
Preamp Type: Solid State
Number of Channels: 2
Frequency Response: 2Hz to 100kHz ±0.1dB, 1Hz to 200kHz ±0.5dB
Impulse Response: 1.4µs
Distortion: XLR out: less than 1ppm (0.0001%); 1/4” out: 0.001%
Input Noise: 1.6nVHz½ at 20dB gain; 0.6nV/Hz½ at 60dB gain
EIN: -132dBV at 20dB gain; -143dBV at 60dB gain
Slew Rate: 22V/µs
Output DC Offset: ±1 mV typical, servo balanced
Power Requirement: 120V AC (100V and 200-240V versions available)
Input: 2 XLR Female balanced transformerless
Input Impedance: 10KΩ phantom on, 100KΩ phantom off
Outputs: 2 XLR Male balanced transformerless (stepped)
2 ¼” TRS XLR Fem. balanced transformerless (variable)
Dimensions: 1 rack space 1.75” x 19” x 10.375”
Weight: 6 lb. (2.7kg)